How to Unload a Module in Linux or Blacklist Module in Grub

How to Unload a Module in Linux or Blacklist Module in Grub

Sometimes you need to unload a kernel module to load your own written code or you want to replace an out-of-box stock module to a vendor provided kernel module. Ir you may just want to unload it because it is buggy at certain cases.

This guide tells you how to unload a module in Linux. This guide will work in any Linux OS distro (I hope so).
First you need to see if the module is really loaded or not and other modules those are dependent on the corresponding module that you want to unload.

How to Unload a Module from a Running Linux Kernel:

You need the below two commands but I will guide you with an example too:

lsmod - lists all modules
rmmod - removes a module from the kernel

Follow the below command in a console to get the particular module details:

$ lsmod | grep <kernel_module_name_to_be_unloaded>

If the above command just returns without any output on the console then understand that the module is not at all loaded. There could be possible that either the module is already unloaded or the device for that particular module is not there in your system.

For example if you want to unload megaraid_sas LSI HBA controller driver from Linux kernel then follow as below:

$ lsmod | grep megaraid_sas

megaraid_sas is the module name for LSI MegaRAID HBA controller driver.

If you won’t find any output on the kernel then either the module is already unloaded or the LSI HBA controller is not at all present on your system.

After executing the above command you will see the details of the megaraid_sas module and other modules those are dependent on megaraid_sas, if it is loaded.

To unload the megaraid_sas module you need to unload the other modules too by executing the following command:

$ rmmod megaraid_sas

If it says ERROR: Module megaraid_sas is in use by xxx, zzz then unload the xxx and zzz modules first and then unload the megaraid_sas. In place of xxx and zzz there will be some real names.

I hope the above explanation just explains neatly how to unload a module in Linux.
When I say Linux I mean almost every Linux distro like Ubuntu, SLES (Open SUSE), RHEL variants and all other possible Linux OS distro out there will follw the same procedure.

But here you have to remember one thing that this modification is not permanent and you will again see the megaraid_sas module loaded in the kernel the next time you will boot.
I have taken megaraid_sas module as an example to explain what are the possible things that must be considered while unloading a kernel module.

How to Blacklist a Linux Kernel Module in Grub Loader:

Now to permanently restrict a kernel module to load you have to make changes to the Grub config file or to the /etc/modeprobe.d/blacklist.conf file.

For example in Ubuntu you have to edit the command line parameters of the default OS in /boot/grub/grub.cfg grub configuration file.

Just add the following line in the command line parameter:

e.g: megaraid_sas.blacklist=yes

Add the following line at the end of /etc/modprobe.d/blacklist.conf file:

blacklist module_name_to_blacklist
e.g: blacklist megaraid_sas

It is possible that you are unable to login to your system because of one such module.
In such a case, you may have to boot your system using a Linux Live Disk and change the respective file to make the module blacklisted.

If you face any problem then login and leave a comment here or open a forum thread in Open SUSE forum which is under Linux forum.

Previous [How to solve] Could not load host key: /etc/ssh/ssh_host_rsa_key issue in FreeBSD or Linux
Next Flashing guide of v6 MIUI ROM for Galaxy S3 i9305

About author

siba 698 posts

A B.Tech degree holder with more than 5 years of experience on Embedded Systems design domain. He has worked on Aerospace domain, NAND storage, Server storage and Wireless networking.

View all posts by this author →

You might also like

Linux Guides 0 Comments

How to Copy Directory in Linux / Unix

If you are looking to copy a directory in Linux using a command line, then here I have explained what command to use to copy a folder in Linux or

Linux Guides 0 Comments

[SHELL] How to know in which shell you are working

There are several ways to know the current shell on which you are working. We will be using some shell commands to know in which Shell you are working on.

Linux Guides 0 Comments

How to setup a network bridge in Ubuntu Linux

This post guides on how to setup a network bridge in Ubuntu Lniux. I just cannot guarantee that this will work on all Ubuntu versions but this will surely work


No Comments Yet!

You can be first to comment this post!